by MANSAV

A 3D version of the Church Symbol for The Church of Jesus Christ of Latter Day Saints.

I used the model from seesaw00 for the statue, which turned out great, except the proportions are slightly off, but in the end you can't really tell.

The words should be able to be printed at full scale, but I printed at 50% any my printer messed up the letters.

I left the base hollow so that you can make a lithophane with the name of the church if desired, but it makes the front part pretty thin.

I printed it on it's back at 50%, it should be fine to print at whatever scale, but the details in the words will take a hit. I included the paper version of the name of the church because of this, set to fit at 50%. The Christus statue was printed standing up, with support.

I would upload the combined model, but the file size is too big between the statue and the lithophane.

Print Settings

Printer brand:

Monoprice

Printer:

Maker Select Plus

Rafts:

No

Supports:

Yes

Resolution:

.1

Infill:

15

Filament_brand:

Hatchbox

Filament_color:

White

Filament_material:

PLA

Notes:

If you are printing the name of the church too, make sure to check your slicer to see if it will turn out ok. I included a paper version for when the print is at 50%.