by CodeMinion
STL Files for cosplay Overwatch's Snowball.
Assembled Dimension: 314.0 mm (w) x 314.0 mm (d) x 290.0 mm (h)
Minimum Printer Volume Required: 220 mm x 220 mm x 220 mm
Fusion 360 Link:
https://a360.co/3aXkfaW
Extra:
4 x #4-40 3/8"
23 x #4-40 5/8"
16 x #4-40 1"
4 x #2-56 7/8".
Magnets. (KJ Magnetics):
6 x D81
8 x D3H1.
Electronics (Adafruit):
1 x 5.0" 40-pin TFT Display
1 x Raspberry Pi Zero
1 x 1m LED Strip
1 x DPI TFT Kippah for Raspberry Pi
1 x Feather nRF52 Bluefruit LE - nRF52832.
Code:
Controller App:
Snowball Internal Logic: https://bit.ly/SnowballLogic
