by fASE-2
source: KILL la KILL -IF
almost there w/ this one. i was reluctant to post it in its current state but it is pretty much done. this will be a RESIN only model since you will most likely experience thin-wall issues on hair, eyelashes, sword, horns and skirt trim if printing FDM. i can add depth to those objects, but honestly, i'd rather keep the model as original as possible w/o making concessions for older 3D printer technology.
i still have to choose which shoulder cone (L or R) to use in the final build and whether to crease the hair among other things. the model still has to be mirrored because i'm pretty sure satsuki is right-handed. do not sub-surf 'sword mount' or 'sword mount ALT' (or cone vents for that matter). pick one or the other when exporting from included BLEND file, but not both or you'll get 'highly connected edge' errors. also, don't include eyelashes since most printers won't be able to slice them.
included STL is only 2xSS but hopefully you've figured out how to export higher poly STLs from my BLENDS... if not, i'll gladly repost instructions.
rebuilding the eye was probably the most challenging since this model had a badly distorted sclera and sharp edges around the eye sockets in the rip as well as a lot of highlights/shadows around the nose and eyes which can't be printed properly.
unskew is close to 100%. my rotation was about 5 degrees off so i readjusted her based on the original. she seems to be leaning forward a bit too much, but that's how she's posed in gallery mode... trust me.
as always, any feedback or suggestions are appreciated.
