by Quajeraz
This is Ruby's demon killing knife from the TV series Supernatural. There is one blade with the symbols, and one without (if you want to add your own). The end of it will be sharp, so be careful.
I ended up making the handle way too long, so you'll have to shorten it in the slicer. I would recommend about 2/3 of the original length. If you do this the tab on the blade to attach it to the handle will probably be too long, so you'll have to cut the end off of that as well. I will (hopefully) release a fixed version at some point.
NOTE: the attached photos are of before I shortened the handle, so the scale should be better for you if you follow my directions.
THIS IS NOT THE CORRECT SCALE!!!!! You will have to scale it up in the slicer.
Print Settings
Printer:
Prusa MINI
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
Print the handle standing up, with the notch at the bottom, with no supports. Print the blade on it's side, symbols facing up, with supports. I printed the hande with a wood fill PLA filament, and the blade white PLA, so I can paint it the right color.
