Building off of the work of Snorri, I have taken his Chucky .obj file he scanned, eliminated roughly 20,000 triangles with F360, then ran the file through meshmixer, and re-uploaded to Thingaverse in .stl format ready to print. Most triangle reductions were in the hair piece. This model maintains all the fine detail seen in the original scan.
Model should print face up with supports touching buildplate only. I printed with .2 layer height, 25% infill, 0.4mm nozzle, at 60mm/s (30mm/s on outer walls) for a 6.5hr print. You can scale the model </> 50% safely but any more than that I cannot make any guarantees on success. As is, this should be a very successful print for anyone, even beginners.
You can use less infill but I printed in rainbow PLA and used extra infill to get a more drastic color change.
We have seen many iterations of Chucky throughout the years. This Chucky bust is from the "Bride of Chucky" movie. I'd love to see your makes so don't forget to upload your make if you print it! Please upload your make to Snorri's page as well. Happy printing!
