by BJ3D
The original model is from Milos, here its userhttps://www.myminifactory.com/users/milostutu
I have reoriented it to improve quality, reduce time and material expense. I have designed tree supports.
To print it, put the following files in your slicer and align them:
capa1-capa2-soportes_capa
batman_body-soportes_body
cabeza-soportes_cabeza
base
In this way you can give a different configuration to the supports and the piece.
Approximately 20h and 250gr PLA
Print Settings
Printer:
custom prusa haribo
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
10