by 3DPrintDogs
"Budew, the Bud Pokémon. In winter, it keeps its bud closed to survive the cold, but then opens it again in the spring."
If I keep watering it, will it evolve into a Roserade..?
Check out our other models for more Pokemon stuff!
We also have a (new) Youtube channel where we'll be posting videos showing how we make some of these models (feat. cute dogs).
https://www.youtube.com/channel/UCpeVw1BA2jA6CIwRG-szrBw
Print Settings
Notes:
Doesn't require supports if you print each half separately. Can be assembled with superglue.
Post-Printing
Recommended processing steps: 1. Sand the model with 220 grit (or similar) sandpaper. 2. Clean the model with water to remove any dust. Wipe it down and ensure it is dry for the next step. 3. Lightly prime the model with a filler primer. 4. Add more light coats with filler primer as needed. 5. Give the primer enough time to completely dry. 6. Sand the primed model with 300-400 grit (or similar) sandpaper 7. (Optional) Prime the model again with regular paint primer. The model is now ready to be painted. I painted it with regular acrylic paints and drew the black parts with a thin sharpie. Then I sprayed the whole thing with a matte topcoat to protect it.
