by Knightzz
This is a Recreation of the 11th Doctors Sonic Screwdriver from Doctor Who and has been designed to be flicked.
Step 1 is to Print (Bulb, Cap, Handle, Leather and Ring)
Step 2 is to Print (MainBody)
Step 3 is to Print( InnerCore)
Step 4 is to Print (4X Claws and Clawmount)
Step 5 is to Print (SilverCage)
Once Printed Start Of by Building the claw Mechanism by using cotton buds cut to size to Hinge the Claws. Next is to Link the Claws using elasticated String about 1mm Thick.
Next insert the Inner Core through the End of the Main Body and Slide on the Claw Mechanism along with the Silver Cage.
After that go ahead and slide the Leather onto the Main Body followed by Ring, Handle and Cap
I have made this sonic so that you can install Electronics if you want it to light up
If you Build it and have any questions please let me know
Print Settings
Printer brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Infill:
20
Filament_brand:
Grey1.75
Filament_color:
Grey
Filament_material:
PLA
