by archie73
Original Model design by Serge Karpovs and re-used and tweaked with permission for 3D printing.
Original Model here:https://gallery.autodesk.com/projects/115874/glock-17
The tolerances on this model are fairly generous (0.4mm) so it should print and snap together without issues on well tuned printers. (Mine is an old Anet A8 and it was fine)
The Hexagon cut outs are for M12 nuts to add weight to the final model.
If you find the slide won't clip into the gun body, you can snap the side clips off and just use the "barrel" front to hold the slide into the gun. The slide will still function.
Print Settings
Printer brand:
Anet
Printer:
A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20-50%
Filament_brand:
eSun
Filament_color:
Silver / Black / Gold
Filament_material:
PLA Silk
Notes:
The slide and frame will need to be printed with supports. All parts are already orientated for best print results.
