by sunboy4224

This is Super Sonic The Hedgehog! Model was originally designed by bonnietheonlybunnyii on Sketchfab (see How I Designed This block for more details).

Place him on your desk to inspire you to follow your heart. Hide him among your enemies things to make them roll around at the speed of sound (in fear). Either way, let this speedy hedgehog's steely (gold-y?) gaze guide you through the path of most rings before they run out and make you blue!

There are 3 different configurations that you can use to print this model.

1. Single - The entire model, as a single mesh.

2. Dual - The entire model separated into 2 parts, the "gold" parts and the "white" parts. You can use this for dual printing.

3. Dual Half - Two halves of the model (with connector), separated into 2 parts ("gold" and "white"). You can use this for dual printing, optimized for machines that have only a single nozzle (so each tool-change operation is expensive).

Print Settings

Printer:

Geeetech A20M

Rafts:

No

Supports:

Yes

Resolution:

.2

Infill:

20

Filament_brand:

CC3D + Hatchbox

Filament_color:

Gold + White

Filament_material:

PLA

Notes:

Sliced in Cura. I made liberal use of custom support structures to ensure all of the small random parts were properly supported. I made my supports extra strong (grid pattern) due to the fact that a previous version failed due to a fallen support structure.

How I Designed This

The original design for this model was created by bonnietheonlybunnyii on Sketchfab: https://sketchfab.com/3d-models/blue-super-sonic-jump-7d37def3b8b5440b958f78ce135f35a0 The model was game-/animation- ready, but not solid. I used a frame from the given animation as a base pose, and then used the rig to fine-tune the model into a final pose. I then made all parts solid and manifold, and gave the model a final cleaning. I then broke the model into parts, added irises and a pedestal, and got it ready for printing.