by nba2006428

00:02 Wonderful first look
When Eeveeencounters the Leaf Stone, he will evolve into a leafeon!

00:12 3D3D Drawing Demo
Use simple 3D modeling foundation to make a leaf stone to match the leaf spirit.

00:19 STL file slicing Demo
According to the original design of the file reduction ratio, there will be no problem of thin parts on the head leaves due to the shrinking relationship. Therefore, it is necessary to use the printing thin parts and the outer wall inlay to change the negative value. The success rate will increase.

00:30 3D Printing Demo
The printing process is prone to wire drawing, so there are a lot of burrs right after printing. This is due to temperature, empty running, objects, etc. It is difficult to avoid this phenomenon, but it is easier to handle, and it can be removed by scraping or The rubbing will disappear.

00:45 Removal of support material
You need to be careful when removing the support. Because there are some small details on the object that are fragile, it is best to remove it slowly, so as not to accidentally break the object. Overall, it is quite easy to remove and does not require much effort.

00:56 Grinding Demo
It takes a little patience to polish. Because there are many empty runs, there should be many threads or small particles in the objects. Although they will disappear after a light polish, there are many places to deal with. If you feel tired, you can consider dividing it for a few more days. deal with.

01:09 Pigment coloring Demo
This coloring is suitable for beginners to practice. Green is not easy to apply. It takes time and patience to apply evenly. It is easy to apply elsewhere. As long as it matches the painted part and the size of the pen, it is very good. It's easy to get started.

01:48 Show time
Eevee evolved into a leafeon, but of course he couldn't beat the Flareon with a relative attribute.

Custom Section