by PropsNstuff 

Here is my take on the Eather Container, from the mcu movie Thor The Dark World.

You can watch my full video build for this project on my YouTube channel PropsNstuff. And here is a link to the video:https://youtu.be/AdCZjEL0S6Y

This is a NEW more accurate version then my first one.
I labeled/described the STL file-parts as best I could. But I guess it’s clear to see what’s what, and what goes where once you’ve checked out the video build.

I printed the main parts in PLA, and the «Rock» walls in ABS. Everything at .12mm with 18% infill. The top ornaments, and the translucent «Red» glowing sides where printed in resin. Just to get a better result. NOTE: The top base. You can do the complete «Labeld A Base» on one go.
Or, you can do it in parts. The «Labeld B Base» can be printed in fdm. While you do the ornament parts in resin. Just to get a better result. And easily glue it all together.
But as always, you can print out all the parts in fdm or resin etc as you see fit yourself.

Only minimal support is needed on the two top and bottom parts.
And again, the way I split the body. Is mainly to maximize optimal print results. Easier post processing for sanding and painting.
And just in case you didn’t guess it. No, this is not any official MCU Marvel prop. Just a fan made version by me.

Its a quick and easy print which was a lot of fun putting together.
I really hope you enjoy it

Feel free to leave a comment on my Youtube Video. Or share a picture of your build.
Makers gonna share:) Cheers

Post-Printing