by rolleyflex
My goal was to hollow the model that it can be filled with sand to increase it's weight.
Two version available:
Split in 2 half for easy printing, but you have to accept the seam between the 2 parts. No matters if you exspect to post process the model.
Full hollow model but you have to choose a proper orientation and add custom supports in your slicer software
Also add a "Chachapoyan" style support
Print Settings
Resolution:
0.12 / 0.14
Infill:
20 / 25%
Filament_brand:
Eryone
Filament_color:
Gold
Filament_material:
PLA
Notes:
Print speed 30 / 40 mm/s.
Allow at least 2 days of printing time for a full scale model.
You have to print pins to center the 2 two half when assemblying, if you choose this version.
The same for the bottom filling plug for both version.