by Mateuszable
A try at a Wraith Heirloom knife from game Apex Legends. Dimensions were all made up but I gave it my best shot. Though I would suggest changing the "width" (distance between the flat planes) as it is a bit too wide. Also change the lenght dimensions either to a full scale or to whatever size your printer allows.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2 or 0.1
Infill:
20 - 100 %
Filament_brand:
Any
Filament_color:
Any
Filament_material:
Any
Notes:
Any filament colour could do as the model should be painted over.
Post-Printing
Paint
Planning to spray paint it myself using black and silver spray paint.
Standards
Overview and Background
Size
The size of the knife should be changed in the slicer so it fits within the dimensions of the printer used. Would also suggest changing the width ( distance from one flat face to the other flat face) as it is a bit wide in my opinion.
Lesson Plan and Activity
Blank
Blank
