by Tenshe
Do you love Baby Yoda? Do you want it colored but don't have a multi-colored printer?
I took the popular one online and separated the various colored elements so you can print them in individual pieces and then glue them together.
The whole thing other than the base will need to be printed with supports and each of the small pieces has a stem added that fits into the coat. In addition to the stem at the base is a platform that simplifies printing.
All you need to do is snip off the hex base leaving as much of the stem as you can, put a drop of glue on the step and put it together. All pieces will only fit where they belong aside from the eyes, they are so small that the stems will fit into either eye socket. So fit them in first to make sure that they are in the correct eye socket before putting glue on them.
One extra word of advice, carful not to add too much glue to the eye socket or it will come out around the eye and look dirty.
Print Settings
Printer brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
Any
Infill:
Any
Filament_brand:
Any
Filament_color:
Black, Tan, Brown, & Green (or Military Green/Olive Green)
Filament_material:
PLA
