by BBrightside 

So now that the pandemic (and a new job search that has finally wrapped up) has given me time to sit on it, I've decided that I'm going to be redoing my "proton pack from the future" design using the things I learned the first time.

I'm curious if anybody would be interested in the STLs on Thingiverse

The following disclaimers apply:

• You can't sell the files, but I don't care if you print, build, and sell a pack. Just credit me (I'm Bryan Brightside on Twitch and Twitter)

• I'm only offering the STLs, not the CAD files, sorry.

• I don't have time to provide support for these files. They're not polished, professional files. They fit together but in some places you'll need glue and "shims" to apply glue to because it's not consistently tabbed. Some tolerances are off and you'll have to sand or file. I don't remember what size or thread of fasteners any of the holes were dimensioned for, but they're all metric (m3, m4, m5 etc at 0.80)

• There aren't any circuit diagrams or prescribed lighting patterns, roll your own. You might want or need some acrylic to make "lenses" for various bits, and you'll have to fab your own reflectors if desired.

• There are ribbon clamps and ports for hoses but I don't have any drawings of those or where they go and don't have time to make them. You can definitely figure it out.

• Again this was a learning project. Some of the parts use excess material and are heavier than they need to be. Some parts literally only connect edge to edge and will require gluing and reinforcement, particularly in the lower portion. Please do not leave comments telling me this isn't polished or could be better. I know!

• I think that's it.

Proton Pack from the Future Take 2 coming soon.