The Frenchie in Standard Pose
This model was created to be used as an anatomy reference for artists. When I am collecting 2D reference images for a project I always find myself wanting the actual object to examine. It is always nice to have a model sitting around to refer to when needed. I always use a model along with more detailed 2D images of specific parts of the Frenchie.
size- H/ 71.2 mm
W/ 37 mm
D/77.6 mm
Model's folder contains:
the Cura profile I used to print the model
STL files of model
rendered images of model
Zbrush turntable video of model
Print Settings
Printer:
LotMaxx SC-10
Rafts:
No
Supports:
Yes
Resolution:
0.05
Infill:
50%
Filament_brand:
Esun
Filament_color:
grey
Filament_material:
PLA
Notes:
I included a few different STL files for you to experiment with. I used the model cut into three pieces. The legs click right into the feet(should still use glue), but the upper body piece has to be lined up and glued. I did this to avoid supports. There are almost no supports used. I also sprayed a thin primer on this model after I filled the seams. As you can see, I did not spend much time sanding. -printed with a .25 nozzle Please contact me if your have any questions.
Post-Printing
