I remixed the Dutch Fluyt by Henry Turner to make it suitable for my train layout. I made it times bigger (the hull) the mast I basically had to redesign since the original ones were oversized and couldn't be used.
Print Settings
Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.08
Infill:
20%
Filament_brand:
RoHs
Filament_color:
White
Filament_material:
PLA
Notes:
I used a 0.2 nozzle with a layer height of 0.08 and a low speed (30 mm/sec) just to get the details right. Tree supports for only touching the build plate. The original design is excellent if it comes to the hull. Very detailed for such a small scale. Kudos to the designer, however when it came to the masts and made them also 4 times bigger they appeared to be too big and too crude. So basically I had to fully redesign it. I printed the masts with a 100% infill and line support, no roof. (Cura) I think the model is still a bit too big, but I am satisfied. Of course I still have to do the rigging and if you're going to do that too, I also posted a picture of existing models. I wanted to add some photos but suddenly thingiverse says they have to be less than 500kb
