by C47_3D
Another figurine of a character from Bloodwars browser / mobile game.
First of male characters.
Model based on in-game image.
Link to polish site (for EN, FR, RU, TR click on the flags on top)
Around 16cm height on original size non counting a weapon.
Base model made in MakeHuman then posed, modelled, sculpted and prepared for 3d print in Blender 3D.
Some postproduction on render and photo made in GIMP.
There are files for full figurine (with or without hair) and to print it in parts (as I did after first failed print with 0.2mm nozzle)
More photos:
https://www.instagram.com/p/CG5PURSLJ8X/
WIPs:
MakeHuman model
https://www.instagram.com/p/CF1pveIDM2y/
Pose and more made in Blender
https://www.instagram.com/p/CF4ZCXqDFhQ/
Cloth and more props
https://www.instagram.com/p/CF97wEFDpPb/
Hair, more details
https://www.instagram.com/p/CGIKMldDjir/
Failed print with 50% size, 0.2mm nozzle (I think my filament did not like such small nozzles ;) - tested on two different nozzles and printers)
https://www.instagram.com/p/CGe-bMSD-ql/
Print Settings
Printer:
JGMaker A1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.4mm
Infill:
10%
Filament_brand:
PrintME
Filament_color:
Polar White
Filament_material:
Ecoline PLA
Notes:
Model made for 0.4mm nozzle. Printed with 0.3mm nozzle and 0.1mm layer hight for little more details. File 'Bloodwars Thoughtcatcher Male_bottom-supports' is for custom support for pants. If you are printing the model in parts. Turn off supports from 'bottom' file, then add file above to slicer and set in Cura as 'print as supports' or 'modify settings for ovelaps' (then add supports there). Shaft part can be printed horizontal (wich will not have very good quality but it prints faster) or vertical. For vertical you can rotate original file or use 'shaft_vertical-supported' file and print it with supports (shaft will be stabiized then)