by Cisco_
It is a cute Bee Just like in the Game
A special request from my daughter (15)
No glue required, the pieces will fit tight
Print the parts 4 colours one at the time or use the MMU file.
The body is 50x30x30mm roughly and will scale up nicely
Print Settings
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15
Filament_brand:
na
Filament_color:
na
Filament_material:
PLA
Notes:
ATTENTION: There is NO clearance between parts. If your machine is very precise, like the MK3, you are OK to print as is. If you 3d printer is not tuned you may have to adjust "X Y size compensation" (horizontal compensation in CURA) if the parts don't fit into each other. Adjust 0.1mm at the time. No support required for parts