by BrunoPizza
Printed the base sideways, so that I could change filament at certain layer for the name.
The model here has no name on the 3d model.
Dog: 0.16 mm resolution, 15%infil, support
Base: 0.2 mm resolution, 10%infil, no support
Print Settings
Printer brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
15%
Filament_brand:
3d max
Filament_color:
white
Filament_material:
pla
