by Kodda74
TLDR, I'm very new to 3D modeling so this may not be perfect. This is a scaled Force-A-Nature model., nothing super special. When you print the barrel it will print with 2 shells inside it. You will have to drill a hole through the middle section's joint, and Barrels joint. The stock should be glued on to the middle section.
Print Settings
Printer brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.16
Infill:
25%
Filament_brand:
Hatchbox
Filament_color:
White/Brown
Filament_material:
PLA
