by UnimatrixRed
It is intened to use color swap for the plate insert colors but of course can also be painted.
I shortened the backplate to come closer to reference photos, and chose the delta for having more width at its bottom points. Made the ring separate so it and the delta can be printed without supports face down, but they can also be printed the other way using supports.
Since its printed face down, to give the delta a nice look I used the bottom infill pattern called archimedean chords.
The metallic filament I used was CC3D Chocolate/rose gold silk PLA for the delta and ring, and CC3D antique gold for the backplate and insert. Use ivory or off-white, and gray for the other insert colors.
Display stand included fitting 8mmx3mm magnets but let me know if you need another size. Also included little tabs that can be used instead of magnets.
Be careful gluing together as there isn't much connection area.
Print Settings
Printer brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20%
Filament_brand:
CC3D
Filament_color:
Silk Rose Gold & Antique Gold
Filament_material:
PLA
