by Noname03
This is a picture of the anime Demon Slayer that has been converted into a 3D object.
Print Settings
Printer brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.05
Infill:
5-100%
Filament_brand:
No matter
Filament_material:
PLA
Notes:
I printed it with a layer height of 0.05 mm, but I haven't tried it with 0.1 mm. Of course, this also affects the quality, so I recommend the smallest possible layer height.
