by Plus1_Man
10:1 scale Lego Minifigure designed by myself. Print-time was about 60 hours and I used 1kg of material. Everything was printed with PLA/PLA+ with layer heights of 0.3mm and 20-30% infill. The joints need 20mm and 32mm diameter pvc pipes (about 20cm in total) some superglue and 3mm screws to set the angle. Face was painted on. I use the model as a bedside lamp. Enjoy and share!!!
Print Settings
Printer brand:
Creality
Printer:
CR-10 Mini
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
25%
Filament_brand:
sunlu
Filament_color:
various
Filament_material:
pla
Standards
Overview and Background
.
Lesson Plan and Activity
.
Materials Needed
about 1 kg of PLA some short pieces of 32mm and 20mm diameter pvc pipe 4x 3mm screws 4x 10mm long m4 studs or similar diameter rods superglue
