by Marcus_GT500
Based on s3v3red's files (thing:4705127). The head has space for a thin led ( or a trimmed common one, my case). Wire the led and place it in the head before gluing the halves. the wire can pass easily through the body, but the head has a tight turn that makes it improbable to pass. Use hot glue on the head hole to hold the led wire and the top of the spring, plus some more on the bottom of the spring, and a little more on the base. This way, if the spring unglues itself, the wire will still hold the head enough for waiting a repair. I've made the lens of the cyber eye by filling the holes with hot glue after placing the led, trimming the excess, and painting it with clear orange. The collar and earrings are very likely to fail if your printer isn't perfectly dialed. Includes an angled spacer for the base if your dash isn't flat.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.08
Infill:
15%
Filament brand:
3dfila
Filament color:
White
Filament material:
ABS
