by 3DChris96
This Death Star is a remix of this model:
https://www.myminifactory.com/object/3d-print-death-star-82575
I modified it, as you can see in the pictures.
I have constructed a pole for the inner part, to which the LED strips can then be attached. There is also a compartment at the top for the battery and switch.
The LED strip is simply wrapped around the pole provided for it, the green laser consists of one LED of the LED strip.
The inner wall of the model must be printed very thin to make the holes. Otherwise, you have to re-drill every, yes EVERY, hole.
Simply glue the pole with the compartment to the top opening with hot glue.
At the end, you can just put both sides together, they should snap into each other.
See in the video: https://www.youtube.com/watch?v=-yRkI2bRuYE&t=207s
Print Settings
Printer brand:
Anycubic
Printer:
All-metal Mega
Supports:
Yes
Resolution:
0.2
Infill:
5
Filament brand:
Redline
Filament color:
Grey/Silver
Filament material:
PLA
