by Boubamazing 

The Daimler Benz Project "F" was designed as a piloted missile to be launched from the Daimler Benz Project "C" carrier aircraft. Six of these manned missiles could be carried at one time. The wings and tailplanes were swept back sharply, and power was supplied by a single BMW 018 jet engine. 3000 kg (6600 lbs) of explosives were located in the nose of the aircraft, which were detonated on impact. Once carried aloft by the carrier aircraft, the DB Project "F" aircraft were then released near the target, with the pilot then choosing his target and then diving towards it. When the pilot was assured of a hit, he was to escape by a hatch located beneath the cockpit. Although this aircraft wasn't officially considered a suicide plane, the pilot probably had a very small chance of survival, due to the speed of the aircraft in the attack and the proximity to the target when escaping.

For more experimental and prototype aircraft like this: https://cults3d.com/en/users/Boubamazing

This model is on 1:72 scale and consists of 11 parts. They are all designed to be printed form both resin and FDM printers (even with stock 0.4mm nozzle) and need minimum supports that won't affect the quality of the model.

You can print the canopy at approximately 90% of its original size and use it to vacuum form a clear plastic !!!

IMPORTANT: "tail fin" must be printed twice !!!

Please consider donating a coffee to stay up later at night and make more cool designs!!!
https://paypal.me/johnboubalis?locale.x=el_GR
or 'Donate'