by rinsewind
I designed this Blaster as a Remix from HPonstein and added Space for electronics in the Front and for a 9v Block Batterie in the handle.
There is a adapter for 5mm LEDs in the Barrel and space for a ON/OFF switch (link below)
there ist a space for a standard reset button for the trigger (link below)
I put an arduino Nano inside and a DFPlayer.
Unluckily i sprayed the finish to early and have to to the painting again =(
switches:https://www.amazon.de/gp/product/B07Z4RW9X6/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Adruino Nano: https://www.amazon.de/AZDelivery-Atmega328-gratis-Arduino-kompatibel/dp/B078SBBST6/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=arduino+nano&qid=1614852421&sr=8-3
DFPlayer: https://www.amazon.de/AZDelivery-Player-DFPlayer-Master-Arduino/dp/B07Z5D7T63/ref=sr_1_1_sspa?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=dfplayer&qid=1614852442&sr=8-1-spons&psc=1&smid=A1X7QLRQH87QA3&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSlJJOVVEVktYOUxYJmVuY3J5cHRlZElkPUEwNzk2MDczMklLVE9LRDE3R1I1RSZlbmNyeXB0ZWRBZElkPUEwNjgwNTI2VFY3TEVaQzNTWkJSJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Reset Buttons for the trigger: https://www.amazon.de/Clyxgs-Micro-Button-Kappe-St%C3%BCck/dp/B07VCCNVZP/ref=sr_1_19?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=taster&qid=1614853734&sr=8-19
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament brand:
PolyMaker
Filament material:
PLA
Custom Section
