by jeremyjd
This is a great 28mm gaming model but I had trouble with some parts not printing well on my FDM Ender Pro so I re-visited some of the pieces.
Rounded out the wheels, they were oval shaped.
I removed the lock plate from the door and created a place to insert the pin instead of having the pin extrude, allowing it to print well on my printer. Please note that you'll have to trim the top door pin down a little bit, I made it extra long.
Print the lock plate separately and then glue it on with superglue.
Added some mounting shelves to the cage giving the seat a place to rest.
Added axle mounts for the wheels, glue these with superglue.
Welded the bear model together, flipped it upside down and added some supports. You'll have to use a raft build plate adhesion for this to print well.
I laid the harness down flat so it would print well. Superglue it onto the harness support.
Print Settings
Printer brand:
Creality
Printer:
Ender 5
Rafts:
Yes
Supports:
No
Resolution:
200
Infill:
20
Filament brand:
PolyMaker
Filament color:
Light Gray
Filament material:
PLA
Notes:
The models are oriented in the correct direction for printing. The door and the bear need raft build plate adhesion for it to print correctly.
Post-Printing