I created what i think would look like a battery powered by Pikachus. I came up with the idea after seeing the 3D printing nerd make tons of little low poly Pikachus. The clear tube is from an old project the measures 2.52in in diameter. As for the Pikachus I used the model form FLOWALISTIK http://www.semaker.com/productdetail/763 at 65% of the original size. If you take the time to print this share your results. Keep printing
Printer Brand:
SeeMeCNC
Printer:
Rostock MAX
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
20%
Notes:
The above settings are for the battery. The Pikachus are 0% infill and 2 walls thick at .25mm layer height.