For Khaz Modan!!
It's Muradin Bronzebeard. Model taken from Heroes of the Storm (originally from https://sfmlab.com/item/503/) and converted into a 3D printable .stl. You will need LOTS of supports (see 'Print Settings - Misc Notes'). But, after removing them, I found that the model printed surprisingly well.
Printer:
Maker Select V2
Rafts:
No
Supports:
Yes
Resolution:
.15
Infill:
15%
Notes:
You will probably NEED extra supports. I strongly recommend looking at the .gcode or layer view to examine how well your slicer is supporting certain parts of the model. As you can tell from one of my pictures, I lost a part of the spear/skull on the back due to lack of supports. Use S3D or something like Meshmixer to place extra supports as needed.
