This holder was made to display the deer necklace found here http://www.semaker.com/productdetail/4195 I resized it to 80% and made a display holder for it with name on it. Mounting holes are to be drilled when assembling with the 3mm bolts I printed and added here. I also drilled 2 holes in the bottom and installed 2 1/4" brass rods 8mm long to give the base some weight. Both upright arms bend in to hold the dear head hart design is was by design you are welcome to keep them straight I just preferred them slightly bent in. Everything was printed excellent 50% infill 2 shells and .2mm at normal speed the bolts were printed on raft 90% infill .1mm and slow, bolts are longer then needed to be fitted after gluing in place. you can leave display plain or add your own names to it. The wife loved this and I gained some man points printing it to give to her. any questions please feel free to ask
Printer:
Da Vinci 1.0
Rafts:
Yes
Supports:
No
Resolution:
.2 for holder,,, .1 for bolts
Infill:
50% holder,,, 90% bolts
Notes:
I used raft on the bolts only because they are tiny and I wanted them to stick to the bed without issues, if you don't have issues with tiny parts not sticking then by all means print without the raft.
