I wanted a sleigh for my kids Elf on the Shelf. The original from Kalebgarrett was the perfect start.
I removed the middle bar, resized the sleigh. I flattened the rails a bit and resized them. I used Tinkercad
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
0.25mm
Infill:
25% Fast Honeycomb
Notes:
Top Solid Layers: 3
Bottom Solid Layers: 0 (so it only had the honeycomb. Large flat areas print better for me that way)
Outline Perimeters: 3
Outline Direction: Inside-out
Hatchbox Black and Red PLA @ 198c/60c
E3D Titan & V6 hotend
Glue rails to Sleigh. I use Weld-On 16 (SciGrip)
