Nirwen's Mercy, the legendary pulse rifle that was a mainstay of year 2 crucible.
I always wanted this so decided to get a file sorted by someone on shapeways.com and print out the gun for myself. Once I've done my basking in the worlds first 3d printed Nirwen's I thought I'd make it available for everyone!
Once built (I used cheap epoxy resin to glue it all together) it's pretty solid and should be able to stand up to light cosplay, mines going on the wall.
I hope all the files work, they didn't need much manipulation on my end, mostly separating of the barrel shrouds and rotating as they're very tricky to print in the vertical position. If you have any questions I'll try my best to help......but no promises.
Printer:
Da Vinci Jnr
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
15%
Notes:
Originally obtained from Destinystlgenerator.com the files were then fixed to be printable and split to be able to fit onto a 6" cubed print bed that the Da Vinci Jnr has. I didn't do the file fixing so can't really help you have any major problems with them.
If you have a larger print bed, or are prepared to manipulate the models some what, you could join a few of the parts together and print fewer overall parts.
Some manipulation and thought it needed when assembling, I had a little trouble and had to fudge it in a couple of places.
