3D Printable Ferrari Enzo, 120mm in length. Should be able to be printing without support and rely on just bridging.
EDIT - The separated parts are for multi-colour printing. If these are printed as individual pieces then assembled they will not fit together as there is no clearance between the parts.
Thanks to SAM67C for the render!
Printer:
Flashforge Creator Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.27
Infill:
25%
Notes:
Nozzle of 0.4mm or lower is required (detail will be lost otherwise)
CATIA V5
