Decorative Twisted Tower miniature, from a project I'm creating (To make this tower of 1.3m high, in concrete material). Model designed on SolidWorks 2016, renders by PhotoView360° (2010-2016).
- Dimensions (cm) : 14.0 (heigh) x 3.1 x 3.1 - Weight (50% infill, PLA) : ~ 30g - Print duration (With recommended settings below) : ~ 2h
Feel free to comment this thing to say me if you like it or not, or if you have questions or suggestions !
Don't forget to share your making ! =D
Enjoy ;)
Design Version : V_5.1 (Final) Print Version : V_2.2
Printer:
CTC (mk8)
Rafts:
Doesn't Matter
Supports:
No
Resolution:
High, 0.3 mm layer heigh MAX
Infill:
From 25%
Notes:
Recommended print settings :
-> Speed while extruding : 40 mm/min
-> Speed while traveling : 60 mm/min
-> Extruder temperature (PLA) : 210 - 220 °C
-> Plate temperature : 120 °C
-> Layer Heigh : 0.15-0.25 mm
Self-imagined this summer, then designed on SolidWorks 2016 !
Model designed by Jetstorm_477 (© Léo CALVENTUS - 2016-2017)
paypal.me/Jetstorm477
