This is a remix of five things!
Rick and Morty Logo by tazzylord9 (look on the bottom of the model)
Customizable Stereo Text by jsc
Rick Sanchez Statue by cariguti
Morty Head by cariguti
Cromulon (Rick & Morty) by unbrandedlx
You can choose between THREE props: One with Rick and Morty faces, one with Cromulons on the corners (they’re watching, their eyes point in every direction!) or one with Rick and Morty faces AND Cromulons!
I added custom supports to the “T” and the “C” with Simplify 3D. By the time the letters started printing, I realized that I had not added support to the “M” of Morty, so my first try was not a 100% success.
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
10%
Notes:
I suggest printing these models big enough so you can get small pliers between the letters to remove the supports. If your Morty heads or Cromulon heads don't stick to the build plate, try adding a skirt with 7 passes.
