This is prop from nintendo game: Monster Hunter Generation
It's called Maccao Piercer and I made it for a desing challenge on Myminifactory, but i'm sharing it here so all who doesn't have a Myminifactory account can print it! As i said there is a design challenge so if you want to HELP ME and leave a like on my design here is a link :
https://www.myminifactory.com/object/28523
Thank you!
All parts are made to be printed with no support!
I put two different blade models:
- Blade full. stl is a one piece blade for bigger 3d printers - Blade 2 pieces. stl is one cutted in half to print it on smaller 3d printers
There is a part called "Internal rod", you'll need it to assemble the dagger. But if you have a rod 20x163mm (20 is a diameter of the rod in mm ) you can use that!
Assembly is very easy, just watch pictures i put here!
All was printed on my Prusa i3 MK2:
0.2 mm layers height
no supports
5mm brim ( so i can print with no glue and be sure that first layer stick to bed )
10% infill
pla fillament was used ( Icefilaments for grey, pink and black parts and BQ filament for the red one, i'm speaking about photos i put here)
Printer:
Prusa i3 MK2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Notes:
I used 5mm brim around all part to make them stick well on printing bed with no glue !
If you printing it with brim , like i did, you'll just need to cut it away!
Designed for challenge
I designed it in Rhinoceros using as reference some photos that i was able to find in internet.
Here is a link myminifactory put on challenge page for the references: https://imgur.com/a/GUUPQ#2YlBnkK
