EDIT: SILENCER PART 1 WAS NOT SCALED PROPERLY! I'VE UPLOADED THE FIX, SO FEEL FREE TO RE-DOWNLOAD
A FULLY CUSTOMIZABLE Assault rifle from Halo 5 Guardians sliced up and ready to print! Every piece is scaled according to the Official Halo Visual Guide, so this is a 100% accurate prop! I've added a build guide that labels the parts and where they go (since there's a lot) and arranged each piece to minimize overhang and use of support material. just download and print!
WARNING: the magazine doesn't fit into the magazine well properly. in the game, the magazine clips through a part of the mesh of the AR model, so when you print this, the hole will only be about half the size you need. My solution would be to glue part 14 to part 15, and part 16 to part 17, then measure how far up it goes, trace the shape, and cut it out of the pieces.
Also, the shape of the longshot scope's rail attachment doesn't match the rails on the AR. either way, i doubt there are many printers that could print a functional rail system that didn't get jammed or broken, so i'd recommend either gluing them on or putting magnets in to change them out.
Want to see more, go visit my Thingiverse page to see my other models!
RECOMMENDED SETTINGS:
Quality: medium to high (depending on your patience)
Support material: minimal
Infill: 5-10% (to save time/filament)
