3D Model  >  Toy  >  Cartoon peripheral products
0+
Pokemon Tyrunt 神奇宝贝 岩石暴龙
Pokemon Tyrunt
Price£0 List:£0.65
Stand by Free Shipping(可下载)
SOLD0 [Comment0Article]
Pokemon_Tyrunt.zip Click to download Downloads: 0  

- +
Add to Cart   
In Stock:99
Seller:Model City 模型城
Satisfaction Good rating0%
Rating:0
Service Attitude:0
Logistics:0
Recommended

by jandjmathis, published

I printed this guy with variable infill (100% knees and tail, 10% everything else).  He stands up nicely this way.

I did not create this 3D Model. I downloaded it from:

http://roestudios.co.uk

I did however have to run it through makeprintable.com in order to print with Simplify3D :)

Here is the license information:

The file you are about to download was produced by Nintendo/GameFreak, and they are the legitimate copyright holders. How you use any of the downloaded files is up to you BUT your usage MUST conform to USC 17 Section 107 and must NOT violate international copyright/intellectual property law, or the copyright/intellectual property law of the United States, the United Kingdom, Japan, your own country of residence, and any other member states, the key points of which are summarized here:

You must not use this file in any way which generates a profit for yourself or anyone else. This includes re-distribution on sites such as MegaUpload, Mega, Dropbox and MediaFire. 'Mirroring' of any files contained within this download is expressly prohibited without permission from RootOfEvilStudios
You must attribute Nintendo and Gamefreak in any visual or digital (including rendered/modeled/traced images) reproduction, with the text "Pokemon is Copyright Gamefreak, Nintendo and The Pokémon Company 2001-2013" in a clear and visible font
DEVIANTART: THE LAST POINT IS LEGALLY BINDING. YOU MUST ADD THE COPYRIGHT NOTICE "3D model data is Copyright Gamefreak, Nintendo and The Pokémon Company 2001-2013" TO YOUR IMAGE DESCRIPTION
ONE FINAL TIMEYou must credit Gamefreak, Nintendo and The Pokémon Company in ANY reproductions of ANY of the downloaded files.

Print Settings

Printer:          

Prusa i3 MK2


Rafts:          

No


Supports:          

Yes


Resolution:          

.15


Infill:          

Variable...



Notes:

Infill: 100% knees and below, 10% everything else so that the model stands up.  This was doable in Simplify3D but I'm guessing other slicers can also do it.