I am learning to use Fusion 360, and decided to make a Fidget Spinner doing that. This is the result.
It uses M8 nuts as weights and a 608 bearing (22X7mm)
The spinner is 10cm in size.
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
45%
Notes:
This is the settings i used, should work with other resolutions and infill to.
Printed in PLA with a 0.4 nozzle.
