Per a request, here's a Stitch fidget spinner that I came up with. This spinner uses (3) 5/16" nuts and one 608 bearing. This spinner is only about 3-1/2" in diameter overall.
I would heat up the print and ball bearing with warm water and the bearings will slip in.
I'll upload a picture when I print one.
Printer Brand:
PowerSpec
Printer:
PowerSpec 3D Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
50%
Notes:
I would print this with supports for the holes behind the stitch head.
