I modeled this in free hand by looking at various images and using Google Earth to get a reference.
In this model, there are are duplicate files depending upon your needs.
If you print any of the "Stand Alone" building files, they just have a flat base.
If you print any of the "With Support" building files, These will need to have the supports peeled off. These files will fit in the base
If you print any of the "- Base" building files, These will fit inside the base.
I created the Terminal Tower and Key tower hollow with the intention of putting an LED inside and lighting up the tops. If you print the top's with clear filament, you can light the tops of the buildings with LED's. I also designed the base so that you can add a back plate to the base. Also the base has multiple holes for extra LED's to shine on the model.
I will update this model when I finish designing it.
Printer Brand:
MakerBot
Printer:
Rafts:
Yes
Supports:
No
Notes:
The Terminal Tower files needed some sanding to fit.
Due to makerbot's lack of editing supports, I created my own supports so that the edges are a little cleaner.
Depending upon your 3D printer, you may have to sand the model to fit the building into the base.
