I sliced this beautiful model up for easier printing with less support. It printed out wonderfully, but I think that you all could probably do a better job gluing than I did. I printed this with 30% infill except the arms which got 50% for a little extra strength. I used 4 perimeters and top/bottom layers (shells), but 5 in the arms. This model looks great at .1mm layer height but would probably look even better at .05mm.
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
.1mm
Infill:
30% - 50%
Notes:
I sliced these into easy to print pieces for glueing together. The head and both legs have included "supported" files, generated by meshmixer, in addition to the raw file if you want to make your own supports. I recommend printing in PETG or something stronger than PLA since the small arms and toes of the model could easily break off with handling.
Sand surface before gluing.
I recommend roughly sanding the surfaces that are going to be glued together for extra adhesion.
