Version 2 of the Death Star plans from Rogue One. The total height is 2mm which should fit into the radar eye slot on most R2Builders droids.
Print the holder in white, disc in gold and the bottom in black. Pause the print before the final two layers for the holder and the disc, change the filament to black to print the details.
Printer:
Raise3D N2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1mm
Infill:
40%
Notes:
The black outlines on the disc and the holder are the top 2 layers if printed at 0.1mm. Insert a pause in the gcode before these two layers and change the filament to black to get a fully 3d printed item.
Glue the disc into the holder, and the bottom onto the holder to finish the item.
