A rehash of vincentstockdale's Piggy Bank (a very small 2x2x2mm solid piggy bank) enlarged to about 150mm high by 160mm long.
Printer:
Tevo Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Notes:
I use BRIM to help the feet stick to the build plate.
I use Meshmixer to modify the original model.
I used Transform to scale the model up to a usable size.
I then used Plane Cut to remove the section of the model that protruded past the feet
Hollow to make it a 1mm thick shell
Meshmix to add a coin slot shape that was Boolean subtracted from the body
The result was exported as an STL for slicing
