Scaled weapons to fit on rack, rotated rack pieces, removed bars from rack (because printing long thin cylinders is dumb when filament comes in long thin cylinders).
This was designed to be used as the weapons rack from Heroquest (30mm), depth of rack is 26 mm, might be a little big for OpenForge. Each of the arms is 2mm thick.
Rafts:
Yes
Supports:
Yes
Resolution:
High=100um
Infill:
22%
Take some filament, or wire and make the rack bars out of that. glue them into the holes.
Arrange the arms, and glue to the rack bars.