A BB-8 fidget spinner I designed in Fusion 360. It uses one 608 bearing and three 3/8-16 in. hex nuts. The hardware is hidden by the large caps that make up the body.
To print the spinner in two colors, change the color at 1.2mm and 6.6mm.
To print the caps in two colors, change the color at 1.2mm.
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Printed in eSun PLA+ Warm White and 3D Solutech PLA, Real Orange.
