This is my first Thingiverse upload. I designed this model in Solidworks since that is the CAD software my university offers. I wanted to create this spinner with some weight to it since it only uses one 608 bearing so I suggest printing with an infill density of 50-80%.
Printer:
Monoprice Select Mini
Rafts:
No
Supports:
No
Infill:
50-80
Assembly
The spinner assembly is quite simple. I inserted the bearing into the "Cap_Shield_1_red" first. Then, inserted "Cap_Shield_1_red" into "Cap_Shield_2_white". Then finally, inserted the "Cap_Shield_2_white" into "Cap_Shield_3_red". Sorry for any confusion. All of the parts were inserted with the help of a clamp and/or vise. Then, the blue caps for the spinner were pushed together. At last, the white stars were glued on the blue spinner caps on both sides. The tolerances for all the parts may need to be tampered with since every printer is different. To increase the strength of the caps, print with higher infill density. Thank you.
